Engineered for mission-critical cutting operations, Non-HF Plasma Torches eliminate high-frequency (HF) noise to protect sensitive electronics while delivering extreme power stability in CNC workshops, naval shipyards, and mining equipment repair.
IPX 62 Technical Data:
| Technical | Data |
| Current | 60 Amp |
| Duty Cycle | 60% |
| Gas | Air/N2 |
| Gas Pressure | 4.5-5.0 Bar |
| Gas Flow | 120-130 LPM |
| Ignition | Without HF |
| Post Flow | 60 sec.recommended |
| Standard Length | 6M |
Recommended Reading:
-
I find fillet welding to be one of the most practical welding methods, widely used for joining parts of metal at right angles. "Fillet welds also play an important role in the construction of bridges, ships, and various frames," Hicks said. Fillet welds are often the best choice to ensure the necessArticle -
Features of Cheap Gasless MIG WeldersWire Feed SpeedWire feed speed is crucial for cheap gasless MIG welders. Lower-priced models offer a wire feed speed range of 40-500 or 600 inches per minute. This still allows for adjustments based on weld thickness. Higher-end models have more precise controlsArticle -
The five key welding parameters are current (40-200 amps), voltage (18-29 volts), travel speed (8-18 inches per minute), electrode type (e.g. E6013, E7018), and shielding gas mixture (e.g. 75% argon, 25% CO2). Table of Contents Switch Current Voltage Travel Speed Electrode Type and Size Shielding GaArticle -
Wire Feed SpeedWire feed speed is crucial for cheap gasless MIG welders. Lower-priced models offer a wire feed speed range of 40-500 or 600 inches per minute. This still allows for adjustments based on weld thickness. Higher-end models have more precise controls and can go up to 700 inches per minutArticle
Product Resources
Catalog, Ordering Chart, & Manual
Grab Your Free Catalog Now! Discover Welding Magic at Your Fingertips – Click, Download, Geek Out on Innovation!
Replacement Parts
| Position | Code | Ref. | Description | |||
| （With "●" is the standard configuration） | ||||||
| ●1 | ISM0620 | CV0170 | Shield cap/IPX62/Hand | |||
| 2 | ISM0675 | CV0125 | Shield cap/IPX62/Gouging | |||
| 3 | ISM0679 | CV0124 | Extended Shield cap/IPX62 | |||
| ●4 | ISM0658 | CV0153 | Shield cap/IPX62/IPX82 | |||
| ●5 | IVS0632-05 | PC0187-05 | Outside nozzle IPX62/gray fiberglass | |||
| 6 | Tip | |||||
| 6.1 | IVU0792-08 | PD0247-08 | Tip φ0.8mm/30A/IPX62 | |||
| 6.2 | IVU0792-09 | PD0247-09 | Tip φ0.9mm/40A/IPX62 | |||
| 6.3 | IVU0792-10 | PD0247-10 | Tip φ1.0mm/50A/IPX62 | |||
| ●6.4 | IVU0792-11 | PD0247-11 | Tip φ1.1mm/60A/IPX62 | |||
| 7 | IVU0756 | PD0251 | Tip 30A-60A/IPX62/Gouging | |||
| 8 | Tip | |||||
| 8.1 | IVU0794-08 | PD0249-08 | Extended tip φ0.8mm/30A/IPX62 | |||
| 8.2 | IVU0794-09 | PD0249-09 | Extended tip φ0.9mm/40A/IPX62 | |||
| 8.3 | IVU0794-10 | PD0249-10 | Extended tip φ1.0mm/50A/IPX62 | |||
| 8.4 | IVU0794-11 | PD0249-11 | Extended tip φ1.1mm/60A/IPX62 | |||
| ●9 | IVF0052 | PE0057 | Diffuser IPX62 | |||
| ●10 | IVB1048 | 52582 | Electrode IPT20C-60/back striking | |||
| 11 | IVB1049 | 52583 | Extended electrode IPT20C-60/back striking | |||
| 12 | IVZ0076 | PF0021 | IPX-45/60 hand torch head | |||
| 12a | IFT0709 | 51620.6 | "O"ring φ15X φ18 IPX62 RED SIL | |||
| 13 | IGV0038-01 | TP0083-01 | Plasma handle manual/PT20-60/IPX torch head | |||
| 14 | IHJ0722 | BW0277 | Protection part/Plasma/Yellow | |||
| 15 | IHQ0070 | 185.0031 | Trigger red | |||
| 16 | IHJ0898 | BW0343 | Plasma Joint/IPT20-60 | |||
| 17 | Cable assembly | |||||
| 17.1 | IVN01106063-22 | Cable assembly/IPX62/6M/2 wires/integrated | ||||
| 17.2 | IVN01106061-22 | Cable assembly/IPX62/6M/2 wires/separate | ||||
| 17.3 | IVN01106060-22 | Cable assembly/IPX62/6M/2 wires/centre adaptor | ||||
| 17.4 | IVN01106066-22 | Cable assembly/IPX62/6M/4 wires/centre adaptor | ||||
| 17.5 | IVN0110606C-22 | Cable assembly/IPX62/6M/coaxial cable/centre adaptor | ||||
| 18 | ICG6006 | MT1001 | Spanner for Plasma | |||
| 19 | IZX0078 | FY0023 | Central adaptor torch side Plasma 5 pins | |||
| 20 | ISM0032 | CV0087 | Circle cutting attachment/IPT20-60 | |||
| 20.1 | ISM0702 | CV0207 | Wheel spacer with spanner IPT20-60 | |||
Complete Torch
| Code | Ref. | Description | |
| A | IVT03071 | Plasma torch IPX62/6M/1/4G/integrated/2 wires | |
| B | IVT03073 | Plasma torch IPX62/6M/central adaptor/2 wires | |
| C | IVT030730 | Plasma torch IPX62/6M/central adaptor/4 wires | |
| D | IVT03074 | Plasma torch IPX62/6M/central adaptor/coaxial cable |
* Certified PLASMA Cutting Welding:
RoHS-compliant materials, ISO 9001:2015 quality-controlled manufacturing, CE Marked per EU directives, and EN 60974-7 compliant arc performance. Precision-engineered for global industrial compliance.
Are you ready to experience the special features of welding?
Boost Productivity Today – Experience how welder-centric engineering, industrial-grade consumables, and fatigue-reducing ergonomics elevate weld quality and operators' safety.
Next Steps
✓ Request Custom Quote: Tailored to your amperage, materials, and workflow
✓ Expert Support: Connect with welding engineers for technical guidance
Engineered for Results. Trusted Globally.
